Neopan Sandwich Roof Panel Systems

Taşyünü

ROOF PANEL – ROCKWOOL
NEOPAN CP – 1000-40/50/75/100 ROCKWOOL
ROOF PANEL SYSTEMS 1000 mm (SHEET METAL + ROCKWOOL + SHEET METAL)

 

These panels, where the rock wool is used as insulation material, are especially preferred for buildings, where there is the requirement for high degree of fire safety, due to the resistance that they show against fire.

The roof panels, which are fire resistant composite system, provide large benefits for sound and heat insulation because of their insulation layer that has class A non-flammability characteristic.

Rock wool is sliced automatically and the fibers are turned perpendicular to the surface of the panel and hence the resistance of the panel against pressure is increased.

Each panel that has been sliced and turned, are placed as offset to one another in a way to avoid breakages.

 

TECHNICAL FEATURES

Building Physics Value for Rockwood Panel

Panel Thickness 40mm 50mm 75mm 100mm
U Values (w/m²K) 0,86 0,70 0,49 0,38
Fire Resistance F60 F60 F90 F140
NOTE: Heat Conduction Coefficient is (λ): 0.040 W/Mk

 

Structural Values of the Panel
* External Side Features: 0,55mm Galvanized Sheet Metal
* Internal Side Features: 0,45mm Galvanized Sheet Metal
* Paint Characteristics: Polyester paint ( Polyethylene protective folio can be applied on the surfaces to protect the panels from damages that can take place during transport and assembly, if required)
* Paint Selection: Colors in the RAL Catalogue
* Useful Width: 1000mm
* Insulation Density (Rock wool):
* Insulation Thicknesses: 50 - 60 - 100 - 120 mm

 


 

Çatı Paneli Taşyünü Teknik Resim

 


ROOF PANEL – EPS
NEOPAN CP – 1000-40/50/75/100 EPS
ROOF PANEL SYSTEMS 1000 mm (SHEET METAL + EPS + SHEET METAL)

 

The economical EPS insulation material, which does not contain harmful substances within its texture, is one of the best choices for heat and sound insulation and it has class B1, non sustained inflammability, difficult to inflame features. 

 

The fact that the panels are light in weight, this provides great ease during transport and assembly.

 

They can be produced at any required length and thicknesses.



TECHNICAL FEATURES
Building Physics Value for Eps Panel
Panel Thickness 40mm 50mm 75mm 100mm
U Values (w/m²K) 0,76 0,63 0,43 0,33
Fire Resistance B1 B1 B1 B1
NOTE: Heat Conduction Coefficient is (λ) : 0,035 W/Mk

 

Structural Values of the Panel
* External Side Features; 0,55mm Galvanized Sheet Metal
* Internal Side Features; 0,45mm Galvanized Sheet Metal
* Paint Characteristics: Polyester paint ( Polyethylene protective folio can be applied on the surfaces to protect the panels from damages that can take place during transport and assembly, if required)
* Paint Selection: Colors in the RAL Catalogue
* Useful Width; 1000mm
* Insulation Density (EPS); 16 kg/m³
* Insulation Thicknesses; 40 - 50 - 75 - 100 mm


Çatı Paneli Eps Teknik Resim